Flygt D8058 Specifications
The Flygt D8058 Stainless Steel Vortex pumps are designed for use in liquids with a pH of 2 to 10. The Vortex impeller creates a large free passage, making clogging a thing of the past. The vortex created when the liquid is set in motion, also ensures that solid parts hardly come into contact with the impeller, which minimizes wear from abrasive parts. The very well-balanced impeller ensures that the construction is not heavily loaded, which means that the pump requires little maintenance. The Flygt D8058 is available in an LT low-pressure version, the MT medium-pressure version and the HT high-pressure version. Contact us for the supply of this extensive range of pumps or for original parts.
Below are all available datasheets with curves and technical specifications for the Flygt D8058, in the low-pressure (LT) and high-pressure (HT) impeller versions. These pumps achieve a maximum capacity of approximately 230 m³/h and a maximum head of approximately 34 m³. Installed power ranges from 1.5 to 2.6 kW and discharge connections of 65 mm (2.5") and 100 mm (4").
Datasheets of the RVS Flygt 8050 with vortex impeller for wastewater pumpingr
D8058 LT low pressure version |
D8058 HT high pressure version |
DP8058w440-10.5kW | DP8058w262-13.0kW |
DS8058w440-10.5kW | DS8058w262-13.0kW |
DP8058w442-10.5kW | DP8058w266-13.0kW |
DS8058w442-10.5kW | DS8058w266-13.0kW |
DP8058w444-10.5kW | DP8058w268-13.0kW |
DP8058w446-10.5kW | DS8058w268-13.0kW |
DS8058w446-10.5kW | DP8058w272-13.0kW |
DP8058w448-10.5kW | DS8058w272-13.0kW |
DS8058w448-10.5kW | |
Installation: DP pump placed on foot bend via guide tubes, DS pump freestanding with mounting plate and 90° press bend